Crates Leather Company, Inc
515 North Holtzclaw Avenue
Chattanooga, TN 37404 USA
Phone: (423) 622-7503

Crates Classic Team Roper

Time-tested and performance-proved for over twenty years, the Crates Classic Team Roper can be found in rodeo, pro and non-pro, over the entire world of rodeo, again and again up to the challenge.

    Features:
  • Fully hand-tooled
  • Antiqued top finish over medium oil
  • Narrow fitting ground seat
  • Rawhide-lined flank billet for
    added strength
  • Extruded nylon Dee-rigging lining
    for added strength

Carefully made on a rawhide-covered Crates exclusive Team Roper Tree, in both Quarterhorse and Performance Horse configuration, using premium heavy saddle skirting leather, hand-tooled trim, hand-rubbed and oiled, with stainless steel hardware and engraved silver conchos. A variety of accessories are available, stirrups and silver conchos.

Sizes from 14 ½" to 16".

9152
9135

Full Sheridan Flower
No. 9152-1 14 ½"
No. 9152-2 15"
No. 9152-3 15 ½"
No. 9152-4 16"

Click here for printable version

Maple Leaf and Basket
No. 9135-1 14 ½"
No. 9135-2 15"
No. 9135-3 15 ½"
No. 9135-4 16"

Click here for printable version
Specifications
Tree: Team Roper, Rawhide Covered, Quarterhorse
Gullet: 6 5/8", 8" High,13" Wide ( Foundation QH is 7" Wide)
Horn: Post, 3" High, 3 ¼" Cap, Rawhide-tipped
Seat: 14 ½" thru 16". Rough-out Suede Pad
Cantle: 4" Oval
Rigging: Double, stainless steel
Skirt: 28" X 14", Saddlefleece lined
Fender: 19" X 9", 3" Leathers, Blevins Buckles
Stirrup: Rawhide Laced Deep Roper
Conchos: Antiqued Silver Steer Head
Finish: Hand-tooled, Oiled, Antiqued
Weight: About 40 pounds
Crates Classic Team Roper
    Features:
  • Fully hand-tooled
  • Antiqued top finish over medium oil
  • Narrow fitting ground seat
  • Rawhide-lined flank billet for added strength
  • Extruded nylon Dee-rigging lining for added strength

Each Crates Classic Team Roper is made using prime heavy select saddle skirting.

Every part is hand-tooled, finished, oiled and antiqued. Hardware is only stainless steel to prevent rusting and tarnish. Only solid copper rivets and fasteners are used. Each Crates is truly a hand-made product.

9110
9120

Corner Basket Tooled
No. 9110-1 14 ½"
No. 9110-2 15"
No. 9110-3 15 ½"
No. 9110-4 16"
No. 9110-5 17"
Note: 9110 available in 17" Seat

Click here for printable version

Half-Breed, Rough-out Jockey and Fender, Combo Sheridan
Flower and Basket
No. 9120-1 14 ½"
No. 9120-2 15"
No. 9120-3 15 ½"
No. 9120-4 16"

Click here for printable version
9130
9140

Combo Sheridan Flower and Basket
No. 9130-1 14 ½ "
No. 9130-2 15"
No. 9130-3 15 ½"
No. 9130-4 16"

Click here for printable version

Border Oak and Basket
No. 9140-1 14 ½"
No. 9140-2 15"
No. 9140-3 15 ½"
No. 9140-4 16"

Click here for printable version
Specifications
Tree: Team Roper, Rawhide Covered, Quarterhorse
Gullet: 6 5/8", 8" High,13" Wide( Foundation QH is 7" Wide)
Horn: Post, 3" High, 3 ¼" Cap, Rawhide-tipped
Seat: 14 ½" thru 16". Rough-out Suede Pad
Cantle: 4" Oval
Rigging: Double, stainless steel
Skirt: 28" X 14", Saddlefleece lined
Fender: 19" X 9", 3" Leathers, Blevins Buckles
Stirrup: Rawhide Laced Deep Roper
Conchos: Antiqued Silver Steer Head
Finish: Hand-tooled, Oiled, Antiqued
Weight: About 40 pounds
copyright   2009 Crates Leahter Company Incorporated  |  website by 7 weight designs & riverlinc